PMA Priming Tool Ball Bearing Drive - Ручной капсулятор с регулировкой глубини посадки

Описание PMA Priming Tool Ball Bearing Drive - Ручной капсулятор с регулировкой глубини посадки

Ручной капсулятор с регулировкой глубини PMA Ball Bearing Drive Priming Tool

Особенности конструкции:
1. в центре находится шарикоподшипник, которий поддерживает шток и систему ричагов
2. изготовлен из нержавеющей стали с шлифовкой контактних поверхностей, что особенно важно на торце штока-толкателя - он строго перпеникулярний и идеально плоская поверхность
3. глубина посадки регулируется головкой, в которой стоит шелхолдер
4. мощний ричаг с минимальний усилием на руке, и максимальним на штоке
5. минимальние допуски на всех узлах
6. єргономика - большинство капсуляторов громоздкие - в отличие от єтого - он как раз нужного размера
7. в комплекте штоки в сборе под большой и малий капсуль
8. чашка которая держит капсуль - толстостенная и держит капсуль строго перпендикулярно штоку
9. использует стандартние шелхолдери Реддинг (продаются отдельно!)

Описание с сайта производителя:

The PMA Fullsize Priming Tool picks up where our Mini Mite left off and takes priming to a whole new level. Includes large and small primer punch assemblies

Key features:

• Ball bearing drive - The ball bearing in this tool serves two functions. It fully supports both the priming punch assembly and engages the linkage. This keeps the punch assembly and link in perfect alignment and eliminates wear on these two parts. The ball bearing also keeps operation smooth (and it's pretty cool too, if we do say so ourselves).
• Ground contact surfaces - We use 17-4 PH stainless steel for all of our moving parts and grind the contact surfaces of our priming punches flat and parallel. This keeps your primers entering straight and bottoming flat in the primer pocket.
• Adjustable head - The adjustable head simplifies making small adjustments to primer seating depth. We prefer to look at adjusting the head as adjusting where the handle will stop when the primer is properly seated and bottomed out firmly in the primer pocket. Our head is infinitely adjustable, no clicks, just a well fitted thread that is kept secure using a friction o-ring so nothing moves while in use.
• Leverage - This tool has a LOT of leverage, this reduces hand fatigue, but still maintains a great feel as the primer bottoms and seats fully into the primer pocket. Once properly adjusted to your preference, the feeling of the primer seating is like hitting a wall, every time. Minimal clearances and tight tolerances - We keep the tolerances on this tool tight and the clearance between the punch assembly and main body to a minimum. This keeps the "guts" of this tool in perfect alignment, every time.
• Ergonomics - So many hand priming tools are much larger than they need to be. This tool fits well in the hand and is 1"" shorter and 4oz lighter than other stainless steel priming tools. We've also engineered an upward swoop to our handle, adding to the comfort of priming.
• Secondary punch (primer cup) - Our secondary punch engages the case head, keeping it square with the primer and punch. It also fully supports the primer (keeping it straight) for entry into the primer pocket.
• Utilizes Redding press type shellholders - We've found that Redding shellholders have the most consistent thru hole in the industry and are the most square. We inspect each shellholder we sell to make sure that it fits our tools before shipping. Redding shellholders you already have should also work.
• Simple swaps from small to large primer and shellholders - Switching from small to large primer assemblies couldn't be simplier. Simply screw off the adjustable head completely, drop out one punch assembly and drop in the other. Shellholder changes are accomplished in the same way.
• Accepts Redding Press Type Shellholders